Sony TRINITRON RM-Y156, Service Manual

Page: 8 / 39

— 8 —
KV-21ME43 KV-21ME43
KV-21ME43 KV-21ME43
KV-21ME43
SECTION 1 GENERALSECTION 1 GENERALSECTION 1 GENERALSECTION 1 GENERALSECTION 1 GENERAL
Connecting Your TV
3
Connecting
Your TV
Read this chapter before setting up your TV for the first time. This section covers basic connections in addition to any optional equipment you may be connecting.
Basic Connections
TV with indoor or outdoor antenna, or CATV cable
Depending on the cable available in your home, choose one of the connections below:
✍
If you are connecting to an indoor or outdoor antenna, it will be necessary to adjust the orientation of the antenna for best reception.
4
User Guide
Connecting Additional Equipment
TV and VCR
1
Connect the coaxial cable from your TV antenna or cable TV to the IN jack on your VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF IN jack on the TV
.
(Optional Connection)
3
If your VCR is equipped with video inputs, for best picture quality you should connect A/V connectors to AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV
. You can use the
button to switch between the TV and VCR inputs.
✍
To
watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
The
instructions
mentioned
here
are
partial
abstracts
from
the
Operating
Instruction
Manual. The
page
numbers
shown
reflect
those
of
the
Operating
Instruction
Manual.