manualshive.com logo in svg

Sony Trinitron RM-W101, Service Manual, Page: 67 / 84

Share
Download
Sony Trinitron RM-W101 Service Manual Download Page 67

8

Installation

Sony KV-BT212M80 Group I15 (

GB

)_2-023-202-11 (1)

The selected channel will appear on
the screen.

2) Press 

2

 

+/–

 to select the new

program number position for your
selected channel, then press 

t

.

3) Repeat steps b) 1) and 2) if you wish

to change the order of the other
channels.

c) Press MENU to go to the next menu.

4

Press 

2

 +/– to select “No”, then press 

t

.

This menu will not appear again the next
time you turn on the TV by pressing 

!

.

To allow this menu to appear again, select
“Yes”, then press 

t

.

Tips

• You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.
• You can also set up your TV by pressing the MENU button on the top control panel for about

five seconds or using the menu system (see page 12).

01

Program Sorting
Program:

01

02
03

04

Select new position

continued

01GB04INS-SVAPAK.p65

5/21/04, 9:39 AM

8

Black

Summary of Contents for Trinitron RM-W101





















































































Reviews:

No comments