– 12 –
KV-BM142M70
RM-W101
SECTION 3
CIRCUIT ADJUSTMENTS
3-1.
ADJUSTMENTS WITH COMMANDER
Service adjustments to this model can be performed using the supplied remote commander RM-W101.
a. ENTERING SERVICE MODE
With the unit on standby
This operation sequence puts the unit into service mode.
This screen display is:
b. METHOD OF CANCELLATION FROM SERVICE MODE
Set the standby condition (Press
[POWER]
button on the commander), then press
[POWER]
button again, hereupon it
becomes TV mode.
c. METHOD OF WRITE INTO MEMORY
1. Set to Service Mode.
2. Press
1
(UP) and
4
(DOWN), to select the adjustment item.
3. Change item by pressing
3
,
6
.
4. Press
[MUTING]
button to indicate WRITE on the screen.
5. Press
-
button to write into memory.
d. MEMORY WRITE CONFIRMATION METHOD
1. After adjustment, pull out the plug from AC outlet, and then plug into AC outlet again.
2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again to confirm adjustments were made.
t
[DISPLAY]
t
5
t
[VOL $+% ]
t
[POWER]
item no.
service data
NVM
field
channel no./
category
in decimal
item name
in decimal
NG
service command
frequency
video input name
GEOM
006
HSIZ
031
x
SERVICE
60
S VIDEO 1
software
service data
reserved
power on time
release ID
version
in binary
for factory
color system
(decimal)
SUS01
0.69U
0001 1111
FF FF
NTSC3
65535
Status Byte
Status Byte
Flash DCXO
#1 SSD
#2 SSD
111 11 11 1 7 11
FG
xy 111
000000
000000
VDSP_C Flag
CO_LOCKED
VDSP
Detected Stereo Type (Direct Value from CZ_ Stereo_Mode)
S : for Sony
A : Aiwa
U S
: US/Latin/Taiwan
E U
: Europe
G A
: General Area
J P
: Japan
0 1 : serial no. of the M/P release
for each destination
111
Needed for Nicam DCXO aligment Purpose
xy
Value of x = 0 - Unknown, 1 - BTSC, 2 - A2, 3 - NICAM,
4 - KOREAN, 5 - Japan, 6 - AV Stereo
Value of y = 0 - Mono, 1 - Stereo, 2 - Bilingual, 4 - SAP/Single
1
,
4
Select the adjustment item.
r
3
,
6
Raise/lower the data value.
r
[MUTING]
Writes.
r
-
Executes the writing.
