Sony Trinitron KV-XG29M61, Service Manual

Page: 35 / 66

– 35 –
KV
-XG29M61
RM-952
Adjustment Item Table
Device Functionality Note Data Range Function Note for Register Slava RAM Address
Name No Name Different Data No. (bit) Address (bit)
SVP 0 SBF 22 3F SECAM BELL f0 1C (7-2) CXA2060AS(8AH) 88 (7-2)
1 HOS 7 0F H Oscillation 0C (7-4) 83 (7-4)
2 SHU 8 0F Sub Hue Control TV/Video 05 (7-2) 21E
3 SCL 1F 3F Sub Color Control NTSC/others 04 (7-2) 21F
PIP 0 SDL 1 0F Delay of output SELECT 01 (6-3) SDA9288X(D6H) 190 (6-3)
1 PPH 15 FF H Position of TOP-LEFT Pin P 01/02 1AF
2 PPV 2E FF V Position of TOP-LEFT Pin P 03 (7-0) 1B0
3 YDL 0 07 Delay of Luminance Input 04 (2-0) 193 (2-0)
4 HDI 0 0F H Sync Delay for Inset 06 (3-0) 195 (3-0)
5 ISC 0 1 Inset Clock Selection 06 (4) 195 (4)
6 CLP 1 1 Clamp Pulse Selection 06 (5) 195 (5)
7 CLC 0 1 Clamp Cycle Selection 06 (6) 195 (6)
8 CON 1 0F Contrast Adjustment for inset 09 (7-4) 198 (7-4)
9 PLL 2 03 H Position For A-ch 0D (6-5) 19C (6-5)
0A PDV 0 0F PIP V Pedestal Level 0E (7-4) 19D (7-4)
0B PDU 0 0F PIP U Pedestal Level 0E (3-0) 19D (3-0)
TXT 0 TXH 1 3 Teletext Horizontal Position 10 (1-0) SAA5261(58H) 257 (1-0)
1 TXV 0 3 Teletext Vertical Position 10 (6-4) 257 (5-4)
OPM 0 OSH 0A 3F OSD H Position Option-Misc 1F1 CXP86461(60H) 17B (7-2)
1 COM 1 03 Comb Selection 24D (7-6)
2 APC 1 1 APC Switch 24C (5)
3 TSY 0 03 TV Sys at Auto TV Sys 24C (4-3)
4 MUT 0 1 No Signal Mute 24C (0)
5 AFM 1 1 Auto FM switch 24C (1)
6 RFB 0 3 C-BPF Control 24D (5-4)
7 TVO 0 7 Tilt to V-Angle offset 24D (2-0)
8 DBL 0 1 Disable Blueback Function 24C (2)
OPB 0 OP1 51 FF Optional Bits 1 (see below) Option-Bits CXP86461(60H) 4B
1 OP2 1 FF Optional Bits 2 (see below) 4C
2 OP3 28 FF Optional Bits 3 (see below) 4D
NOTE
•
shaded items are fixed data.
•
Standard data listed on the Adjustment Item Table are reference values, therefore it may be different for each model and for each mode.
•
Note for Different Data Those are the standard data values written on the microprocessor. Therefore, the data values of the modes and stored respectively in the
memory.
In case of a device replacement, adjustment by rewriting the data value is necessary for some items.