background image

– 12 –

KV
-XG29M61

RM-952

Using Your New TV

12

Watching the TV (continued)

To

Turn off temporarily

Turn off completely

Mute the sound

Watch the video input
(VCR, camcorder, etc.)

Jump back to the previous channel

Display the on-screen information*

Adjust the volume of each TV
program automatically

Adjust the picture position when it
is not aligned to the TV screen

Do this

Press 

u

. The 

u

 indicator on the TV lights up red.

Press 

U

 on the TV.

Press 

¤

.

Press 

 to select “VIDEO 1” or “VIDEO 2”.

To return to the TV program, press 

;

.

Press JUMP.

Press 

.

Press SELECT repeatedly until “INTELLIGENT VOL”
appears, then press + or – to select “ON”.
To cancel, select “OFF”.

Press SELECT repeatedly until “PIC ROTATION”
appears, then press + or – to adjust the alignment of the
picture position.

The 

 or 

 icon on the screen flashes while

adjusting.

Additional tasks

* The picture, sound, and either the program number or video mode are

displayed. The on-screen display for the picture and sound information
disappears after about 3 seconds.

Changing the on-screen display language

1

Press SELECT until
“LANGUAGE / 

:

ENGLISH”appears on the
screen.

2

Press + or – to select
“       “.

Tip

You can also use SELECT and 

.

 +/– on the TV to select the on-screen

display language.

b

b

SELECT

LANGUAGE /       : ENGLISH

/ LANGUAGE: 

PIC ROTATION

Using Your New TV

Using Y

our New TV

11

Watching the TV

This section explains functions used
while watching the TV. Most operations
can be done using the remote.

1

Press 

U

 to turn on the TV.

When the TV is in the
standby mode (the 

u

indicator on the TV is lit
red), press 

u

 on the remote

or PROGR +/– on the TV.

2

Press PROGR +/– or the
number buttons to select
the TV program.

For double digit numbers,
press 

÷

, then the number

(e.g., for 25, press 

÷

,  then

2 and 5).

3

Press 

.

 +/– to adjust the

volume.

¤

u

Number buttons

SELECT

.

 +/–

PROGR +/–

 

 

 

 

+ or –

JUMP

FAVORITE

or

continued

PROGR

TV

1

2

3

4

6

7

8

9

÷

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

Á

1

2

3

4

5

6

7

8

0

-/--

9

PROGR

;

Summary of Contents for Trinitron KV-XG29M61



































































Reviews: