– 43 –
KV
-XF29M50/XF29M80/XF29K94
RM-954
RM-962
2-12. PICTURE TUBE REMOVAL
!¡
!§
!¶
Four DGC clip
DGC holder
!™
Demagnetic coil
0
Four claws
1
Four screws
(washer head)
(+P 4
×
16)
3
Four screws
(washer head)
(+P 4
×
16)
2
Speaker Bracket
assy (L)
4
Speaker Bracket
assy (R)
!¢
Two screws
(Tapping)
6
Chassis assy
Cushion
(50
×
550)
DGC
9
Deflection
yoke
8
Neck assy
7
C board
5
Anode cap
!∞
Picture tube
Cushion
!¢
Two screws
(Tapping)
!£
Tension
spring
•
REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of the picture tube and
the anode cap to the metal chassis, CRT shield or carbon paint on the
CRT.
•
REMOVING PROCEDURES
1
Do not damage the surface of anode-caps with sharp shaped objects.
2
Do not press the rubber too hard so as not to damage the inside of anode-cap.
A metal fitting called the shatter-hook terminal is built into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.
•
HOW TO HANDLE AN ANODE-CAP
3
When one side of the rubber cap is separated from the anode button, the anode-cap
can be removed by turning up the rubber cap and pulling it up in the direction of the
arrow
c
.
2
Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow
b
.
1
Turn up one side of the rubber cap in the direction indicated by the arrow
a
.
a
a
b
b
Anode button
c
