–
11
–
KV
-XA25M30A/XA29M30A
RM-952
Using Your New TV
10
Presetting channels (continued)
Presetting channels manually
1
Press SELECT until
“MANUAL PROGRAM”
appears.
2
Press + or – to enter the
“MANUAL PROGRAM”
mode.
3
Press PROGR +/– or the
number buttons until the
desired program number
appears.
4
Press + or – until the
desired channel picture
appears.
5
Press SELECT to exit the
“MANUAL PROGRAM”
mode.
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the
8
(antenna)
terminal
(1) Press SELECT until “TV SYS” appears.
(2) Press + or – to select the appropriate
TV system until the picture or sound
quality is optimal.
B/G
I
D/K
M
VHF LOW B/G
TV SYS: B/G
MANUAL PROGRAM
or
1
2
3
4
5
6
7
8
0
-/--
9
PROGR
SELECT
1
SELECT
Using Your New TV
Using Y
our New TV
11
To change the color system setting
If the color is abnormal when receiving programs through the
8
(antenna) terminal
or the
t
(video input) jack
(1) Press SELECT until “COLOR SYS” appears.
(2) Press + or – to select the appropriate
color system until the color is
optimal.
Tip
• Normally set “COLOR SYS” to “AUTO”.
Skipping program numbers
1
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
2
Press SELECT until “MANUAL PROGRAM” appears.
3
Press + or – to enter the “MANUAL PROGRAM” mode.
4
Press PIC MODE.
5
Press SELECT to exit the “MANUAL PROGRAM” mode.
Note
• To restore the skipped program number again, preset the channel
automatically or manually.
Tip
• You can also use SELECT and
2
+/– on the TV to preset channels and
skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears.
(3) Press + or – to enter the “MANUAL PROGRAM” mode.
(4) Press
to display “FINE” on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to exit the “MANUAL PROGRAM” mode.
COLOR SYS: AUTO
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
