Sony Trinitron KV-SA28 Operating Instructions Manual Download

Page: 36 / 40

Additional Information

Sony KV-SA32M36 Group F12 (

)_2-348-392-11 (1)

Troubleshooting

If you find any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.

Reset function

Press the RESET button on your remote control.
Your TV will go blank for a few seconds
then the “Initial Setup” menu will appear.

Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.

Troubleshooting guide

Snowy picture

Noisy sound

Distorted picture

Noisy sound

Good picture

Noisy sound

Possible cause

Symptom

Solutions

Page

–

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup.

Contact a Sony dealer for advice.

• Display the “Channel Setup” menu and

select “Manual Program” to preset the
channel again.

• Display the “Channel Setup” menu and

set the “Signal Booster” to “Auto” from
“Manual Program”.

• Try using an external booster.

• Turn off or disconnect the external booster

if it is in use.

• Display the “Channel Setup” menu and

set the “Signal Booster” to “Off” from
“Manual Program”.

• Display the “Channel Setup” menu and

select the appropriate “TV System” from
“Manual Program”.

• Press

• The connection is loose

or the cable is
damaged.

• The antenna setup is

inappropriate.

• Channel presetting is

inappropriate or
incomplete.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

is inappropriate.

• PIP sound is selected

when PIP is displayed.

PROG

OPTION RESET

RESET

01GB08ADV-STMOce.p65

10/14/04, 6:08 PM

Black

Summary of Contents for Trinitron KV-SA28









































Search results

Summary of Contents for Trinitron KV-SA28

Reviews:

Related manuals for Trinitron KV-SA28

Brands by name

Popular brands

Sony Trinitron KV-SA28, Operating Instructions Manual

Search results

Summary of Contents for Trinitron KV-SA28

Reviews:

Related manuals for Trinitron KV-SA28

Brands by name

Popular brands