– 7 –
KV
-LX34M50
RM-871
Getting Started
12
Disabling program positions
By disabling unused or unwanted program positions,
you can skip those positions when you press PROGR
+/–.
1
Press MENU.
2
Press
V
or
v
to move the cursor (
z
) to the
PRESET menu (
), and press ENTER.
3
Press
V
or
v
to move the cursor (
z
) to SKIP,
and press ENTER.
4
Press
V
or
v
until the unused or unwanted
program position appears on the menu,
and press ENTER.
5
Press
V
/
b
/
v
/
B
to select ON, and press ENTER.
6
To disable other program positions, repeat
steps 4 and 5.
7
Press MENU to return to the normal screen.
To cancel the skip setting
1
Display the PRESET menu.
2
Press
V
or
v
to move the cursor (
z
) to SKIP, and
press ENTER.
3
Press
V
or
v
until the program position you want to
cancel the skip setting appears, and press ENTER.
4
Press
V
/
b
/
v
/
B
to select OFF, and press ENTER.
4
Press
V
or
v
to move the cursor (
z
) to
MANUAL PROGRAM, and press ENTER.
5
Select the program position to which you
want to preset a channel.
(1) Make sure the cursor (
z
) appears beside PR, and
press ENTER.
(2) Press
V
/
b
/
v
/
B
until the program position you
want appears on the menu, and press ENTER.
6
Select the desired channel.
(1) Press
V
or
v
to move the cursor (
z
) to VHF LOW,
and press ENTER.
(2) Press
V
/
b
/
v
/
B
until the desired channel picture
appears on the TV screen, and press ENTER.
7
Press MENU to return to the normal screen.
If the TV signal is too strong
The picture may be distorted. You can reduce the
picture distortion as described below.
1
Display the PRESET menu.
2
Press
V
or
v
to move the cursor (
z
) to MANUAL
PROGRAM, and press ENTER.
3
Press
V
or
v
to move the cursor (
z
) to ATT, and
press ENTER.
4
Press
V
/
b
/
v
/
B
to select ON, and press ENTER.
If the TV system is not properly selected
The picture color may be poor and/or the sound may
be noisy. In this case, select the appropriate TV system.
1
Press PROGR +/– or the number buttons to select
the program position.
2
Display the PRESET menu.
3
Press
V
or
v
to move the cursor (
z
) to TV SYS, and
press ENTER.
4
Press
V
/
b
/
v
/
B
until the appropriate TV system
appears, and press ENTER.
Notes
• The TV system and the ATT (attenuator) settings are
memorized for each program position.
• If you do not know your local TV system, consult your nearest
Sony dealer or authorized service center.
T V S Y S : B / G
VHF L O W
P R : 0 1
AT T : OFF
MANUA L PROGRAM
ENTER
ENTER
Operations
13
Watching the TV
To scan through program positions
Press PROGR +/– on the remote commander or the
TV until the program position you want appears.
3
Press
Á
+/– on the remote commander or
the TV to adjust the volume.
Turning off the TV
To turn off the TV temporarily
Press
u
on the remote commander or the TV. The
u
indicator lights up.
To turn off the TV completely
Press
U
on the TV.
Watching the video input
Press
…
on the remote commander or
…
on
the TV.
1
Press
U
to turn on the TV.
When the TV is turned on in the standby mode, the
u
indicator on the TV lights up. To turn on the TV
completely, press
u
on the remote commander or
the TV. When the TV is turned on completely, the
PROGR +/–,
Á
+/–, and
…
indicators on the TV
light up.
2
Select the TV program you want to watch.
To select a program position directly
Press the number button.
To select a two-digit program position, press “
÷
”
before the number buttons.
For example: to select program position 25, press
“
÷
,” then “2” and “5.”
PROGR
2
-/--
5
VIDEO 1
VIDEO 2
VIDEO 3
1
Operations
1
2
3
4
5
6
7
8
0
-/--
9
/
O
FREEZE
SWAP
PIP
PROGR
