Sony TRINITRON KV-ES34M90, Service Manual

Page: 22 / 136

http://cxema.ru
– 22 –
KV-ES34M90
RM-916
31
Adjusting Y
our Setup (MENU)
For “PICTURE” “COLOR” “BRIGHT” “HUE”* “SHARP”
COLOR
0
8
BALANCE
0
0
bb
bb
Adjusting the “ADJUST” options under “PICTURE MODE”
1
Move
up or down to
select the desired item (e.g., “COLOR”), then press
.
2
Adjust the value according to the following table, then press
.
*
Y
ou can adjust “HUE” for the NTSC color system only
.
3
Repeat the above steps to adjust other items. The adjusted settings will be r
eceived when you select “PERSONAL”.
Adjusting the “ADJUST” options under “SOUND MODE”
1
Move
up or down to
select the desired item (e.g., “BALANCE”), then press
.
2
Adjust the value according to the following table, then press
.
3
Repeat the above steps to adjust other items. The adjusted settings will be r
eceived when you select “PERSONAL”.
For
“BASS” “TREBLE” “BALANCE” “BBE”
Move down or left to decr
ease the bass, up or right to incr
ease the bass.
down or left to decr
ease the tr
eble, up or right to incr
ease the tr
eble.
down or left to incr
ease the left speaker
’s volume, up or right to incr
ease
the right speaker
’s volume.
up or down to select “HIGH”, “LOW”, or “OFF”. “BBE” can pr
oduce clear sound.
continued
Move
down or left to
decr
ease pictur
e contrast
decr
ease color intensity
darken the pictur
e
incr
ease r
ed pictur
e tones
soften the pictur
e
Move
up or right to
incr
ease pictur
e contrast
incr
ease color intensity
brighten the pictur
e
incr
ease gr
een pictur
e tones
sharpen the pictur
e
32
Adjusting Y
our Setup (MENU)
To receive digital audio signal thr
ough
DIGIT
AL
IN (component
video input) jack. receive analog audio signal thr
ough
L
and R (component
video input) jack.
b
A/V
C
O
N
T
R
O
L ON
PICTURE MODE DRC-MF : DRC
OFF
SOUND MODE SURROUND : O DIGITAL IN
Changing the “A/V CONTROL” setting (continued)
Setting the “DIGIT
AL IN” options
1
In the “DIGIT
AL IN”
menu, move
up or
down to select the desired option (see table below).
2
Press
to confirm the
selected option.
Note
•
Y
our TV can only r
eceive Dolby Digital or Linear PCM format digital
signals thr
ough the
DIGIT
AL
IN (component video input) jack
(see page 7). Receiving any other format digital signal may cause unwanted noise or no sound fr
om the speakers.
Tip
•
For details on the menu system and how to use the menu, r
efer to
“Intr
oducing the menu system” on page 27.
Select
“ON“ “OFF”