Sony TRINITRON KV-AR25M81A Page 85 Service Manual Download

Page: 85 / 90

Additional Information

Troubleshooting

If you find any problem while viewing your TV, please check the following guide. If
any problem persists, contact your Sony dealer .

Possible cause

Symptom

Solutions

Page

–

Additional Information

continued

Snowy picture

Noisy sound

Distorted picture

Noisy sound

Good picture

Noisy sound

No picture

No sound

• Check the antenna cable and connection

on the TV, VCR and on the wall.

• Press SELECT until “MANUAL

PROGRAM” appears on the screen, then
preset the channel again.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Try using a booster.

• Turn off or disconnect the booster if it is

in use.

• If the sound of all the channels are noisy,

check the TV system (“TV SYS”) setting,
then press AUTO PROGR to preset the
channels again.

• If the sound of some channels are noisy,

select the channel, then select the
appropriate TV system (“TV SYS”).

• Check the power cord, antenna and the

VCR connections.

• Press

?/1

(power).

• Press

(main power) on the TV to turn

off the TV for about five seconds, then
turn it on again.

• Connection is loose or

the cable is damaged.

• Channel presetting is

inappropriate or
incomplete.

• The antenna setup is

inappropriate.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

or channel presetting
is inappropriate or
incomplete.

• The power cord,

antenna or VCR is not
connected.

• The TV is not turned

on.

Summary of Contents for TRINITRON KV-AR25M81A



























































































Search results

Summary of Contents for TRINITRON KV-AR25M81A

Reviews:

Related manuals for TRINITRON KV-AR25M81A

Brands by name

Popular brands

Sony TRINITRON KV-AR25M81A, Service Manual

Search results

Summary of Contents for TRINITRON KV-AR25M81A

Reviews:

Related manuals for TRINITRON KV-AR25M81A

Brands by name

Popular brands