30
R/D/D/D
L/G/S/I
1
S
2
2
3
L/G/
S/I
R/D/
D/D
C
S
S
MODEM
R/D/D/D
L/G/S/I
1
S
2
2
3
MODEM
L/G/
S/I
R/D/
D/D
C
S
S
Integrated D
igital TV
D
D
D
DOLBY SUR
ROUND
PRO
. LO
GIC
- +
2
MONO
2
L/G/S/I
R/D/D/D
s
P
Connecting equipment to the TV
1. Connect your equipment to the correct TV socket as shown.
2. Press the
button repeatedly on the remote control until the correct input symbol for
your equipment appears on the TV screen:
3. Switch on the connected equipment.
4. To return to normal TV operation, keep pressing the
button on the remote control
until the TV picture appears.
Note:
To avoid picture distortion, do not connect equipment to the
,
,
and
sockets at the same time.
Additional information when connecting equipment
Connecting a VCR
To record and playback digital programmes you must connect your VCR to the
socket
using a scart lead (the VCR relies on the TV to convert digital programmes to signals suitable
for recording, which are then output from the TV via the scart socket).
To record analogue programmes on the VCR, connect your external aerial to the upper socket
marked
on the TV, then connect a lead from the RF input of the VCR to the lower aerial
socket marked
on the TV.
Note:
If you have set the Auto 16:9 feature to ‘On’ (see page 14), any digital recording made
from the
socket will not detect the 16:9 mode, and during playback the picture will be
displayed in the mode you previously selected from the ‘Format’ options.
Connecting headphones
Plug in your headphones to the
socket of the concealed panel on the side of the TV.
Connecting to external audio equipment
Plug in your hi-fi equipment to the
sockets on the rear of the TV if you wish to amplify
the audio output from the TV. The output level from the
sockets can be varied by adjusting
the volume of the headphones (refer to the ‘Adjusting the sound’ section of this manual).
For mono equipment
Connect the phono plug of your equipment to the L/G/S/I socket of the concealed panel on
the side of the TV, then select the
input signal using the instructions on this page.
Finally, refer to the ‘Adjusting the sound’ section of this manual and select ‘A’ on the sound
menu screen.
Symbol
Input signals
•
Audio/video input signal through the scart connector
•
RGB input signal through the scart connector
•
Audio/video input signal through the scart connector
or the
phono sockets
and
•
S video input signal through the scart connector
or the
sockets
and
•
Audio/video input signal through the scart connector
1
F
F
2
G
B
C
s
2
G
A
C
3
H
A
B
C
G
H
H
D
E
E
2
8mm/Hi8
camcorder
S-VHS/Hi8/
DV or Digital 8
camcorder
PlayStation
VCR
Hi-Fi
DVD
Decoder
B
C
D
E F G
H
A
Optional equipment
Using the following instructions, you can connect a wide range of optional equipment to your TV.
Connecting equipment to the TV
Summary of Contents for Trinitron KV-28DX30U
