Sony Trinitron KV-27TS35, Service Manual

Page: 8 / 58

14. PRESETTING TV CHANNELS
TV/VIDEO
POWER
1
Press POWER on the TV or the Remote Commander to turn the
N
on.
POWER
POWER
- N / V I D E O
AUTO PGM
CH
2
Turn the cable connection on or off, depending on if you want to preset
cable or VHF/UHF channels.
(FOLLOW THE STEPS ON P 14)
If “VIDEO” or VIDEO” displayed on the screen, press the N/VIDEO button on
Nor the Remote Commander that a channel number appears.
3
Press AUTO PGM.
AUTO PGM
“AUTO PROGRAM displayed on the screen and channels (other than the
channels preset) will be sequence. The channels
the memory.
When no channels can be found. the stops and the numbered
channel displayed.
4
Press CH to check or preset channels.
Channels that can be received on this TV:
VHF 2 13
UHF 14 69
Cable: 1 125
To erase unnecessary channels, or to add channels that could not be
preset automatically because
strength was too weak, follow the
steps Unnecessary Channels” and “Presetting Only
Dewed Channels”
- N / V I D E O
CH Cl-
W I N D O W
+ / -
- 1 M E N U
-ENTER
Use feature to erase channels from the channel scan
memory.
Note
You cannot use CHANNEL ERASE while the
N
VIDEO mode. Before
channels, N mode by N/VIDEO.
1
Press MENU to display the screen.
M E N U
USE 8
2
Press the +I- button to select SET UP
Press ENTER.
ENTER
GUIDE
UP
8 IENTERI.
3
Press the button to select CHANNEL ERASE.
CAPTION