Sony Trinitron KV-27TS35, Service Manual

Page: 25 / 58

3-2. CONVERGENCE
Preparation :
l
Before starting this adjustment, adjust the focus,
horizontal size, and vertical size.
l
Minimize the brightness setting.
l
Provide dot pattern.
(1)
Horizontal and Vertical Static Convergence
Center dot
V. STAT Magnet
H. STAT
I
RV 701 H. STAT
RV 708 (G 2) SCREEN
1. (Moving horizontally), adjust the control
so that the red, green, and blue points are on top
of each other at the center of the screen.
2 . (Moving vertically), adjust the V.STAT magnet so
that the red, green, and blue points are on top of
each other at the center of the screen.
3 . If the H.STAT variable resistor cannot bring the
red, green, and blue points together at the center
of the screen, adjust the horizontal convergence
with the H.STAT variable resistor and the V.
STAT magnet in the manner given below.
(In this case, the H.STAT variable resistor and the
V.STAT magnet influence each other)
Tilt the V.STAT magnet and adjust the static
convergence by opening or closing the V.STAT
magnet.
4 . If the V.STAT magnet is moved in the direction of
the and arrows, the red, green, and blue
points move as shown below.
R G