Sony ta-ax44, Service Manual

Page: 8 / 36

TAPE RECORDING AND TAPE COPY
TO RECORD
Select the program to be recorded with the FUNCTION switches.
@Start the program and set the tape recorder in the record mode.
Record
The filters, and tone and volume settings have no effect on record-
ing.
Monitoring of a tape recorder
If your tape recorder has separate record and playback heads, you
can monitor the recording results.
When the tape recorder used for recording is connected to the
TAPE RECORDER 1 REC OUT jacks, press the TAPE 1 switch and
you can monitor the recording results. Press the TAPE 1 switch
again to disengage, and the source sound will be heard. Be sure to
keep the monitor switch of the tape recorder in the TAPE position.
TO COPY
If you have two tape recorders, you can copy a taped program from
tape recorder 1 (connected to TAPE RECORDER 1 TAPE inputs) to
tape recorder 2 (connected to TAPE RECORDER 2 REC OUT out-
puts). Tape copy from tape recorder 2 to tape recorder 1 cannot be
made.
You can copy a tape while listening to a record or a broadcast.
Insert the recorded tape into the tape recorder 1 and a blank tape
into the tape recorder 2.
Press the TAPE COPY switch.
Adjust the recording level of tape recorder 2.
Start the playback of tape recorder 1 and the recording of tape
recorder 2. Copying will begin.
ape deck 1 (for playback)
Tape deck 2 (for recording
\
To listen to a program while the tape is being copied
For the playback sound of tape recorder 1 press the TAPE 1
switch.
For a program source connected to the PHONO, TUNER or
inputs press the appropriate FUNCTION switch.
REMOTE CONTROL OPERATION WITH AN
OPTIONAL REMOTE CONTROLLER
The optional RM-44 system remote controller controls the following
functions of the amplifier: power on/off, program selection,
acoustic setting selection, muting on/off, and volume adjustment.
This remote controller, with its infrared ray sensor, can control con-
nected components by an infrared ray transmitted from the RM-44C
remote commander supplied with the system remote controller.
For connections and operations, refer to the system remote con-
troller’s instruction manual.
Tuner
Cassette deck
Turntable
Infrared-ray command RM-44