Sony ta-ax44 Service Manual Download Page 3

PRECAUTIONS

On safety

Check that the operating voltage of your unit is identical 

 the

voltage of your local power supply.

Should any liquid or solid object fall into the cabinet, unplug the

unit and have it checked by qualified personnel before operating 
any further.

Unplug the unit from the wall outlet if it is not to be used for an

extended period of time. To disconnect the cord, pull it out by
grasping the plug. Never pull the cord itself.

On 

installation

Do not install the 

 in a location near heat sources such as

radiators or air ducts, or in a place subject to direct sunlight, ex-
cessive dust, mechanical vibration or shock.

Good air circulation is essential to prevent internal heat build-up

in the unit. Place the unit in the location with adequate air circula-
tion. Do not place the unit on a soft surface, such as a rug that
would block the ventilation holes on the bottom.

DO not place anything on top of the cabinet. The top ventilation

holes must be unobstructed for the proper operation of the unit and
to prolong the life of its components.

On operation

Before making program source connections, be sure to turn the

power switch off and unplug the unit.

Do not attempt to test the protection circuits by blocking the ven-

tilation holes or connecting improper loads.

When the unit is not used, turn the power off, to conserve energy

and to extend the useful life of your unit.

On 

cleaning the cabinet

Clean the cabinet, panel and controls with a soft cloth lightly
moistened with mild detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent such as alcohol or 
zine.

On repacking

Do not throw away the carton and the packing material. It makes an
ideal container to transport the unit in. When shipping the unit for
repair work or to another location, repack it as illustrated on the

carton box.

MODEL IDENTIFICATION

 Specification Label 

 model1

MODEL NO. 

TA-AX44

INTEGRATED STEREO AMPLIFIER

AC 

 

 

q

I

SERIAL NO.

L _ _ _ _ _ _

MADE IN JAPAN

[US, 

Canadian model]

MODEL NO. 

TA-AX44

INTEGRATED STEREO AMPLIFIER

 

 

c

l

SERIAL NO.

MADE IN JAPAN

[UK model]

MODEL NO. 

TA-AX44

INTEGRATED STEREO AMPLIFIER

 270W

c

l

c l

SERIAL NO,

MADE IN JAPAN

Summary of Contents for ta-ax44





































Reviews: