Sony SVT-N72P, Operating Instructions Manual

Page: 35 / 288

35
Displaying the Alarm List —
Alarm Recall Scanning the Picture of the
Alarm Recordings — Alarm Scan
2 1
1
Turn on the power of the equipment to be used.
2
Press SEARCH/AUDIO ON in stop mode until AL
SCAN lights in the display window or on the
monitor screen.
3
Press FF M or REW m .
The portions where the alarm function worked are
subsequently played back for five seconds one by
one.
Press PAUSE X to view a certain scene in still mode.
(Alarm scan mode will be released.)
Press STOP
x
, PLAY
B
, FF
M
or REW
m
to
release alarm scan mode.
Notes
• If the tape reaches the end during scanning, the tape is
rewound and the VCR enters the stop mode at the
beginning of the tape.
• You can use the alarm scan only when the alarm speed is
set to 3H and the recorded section is longer than 20
seconds.
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until “9” of the MAIN
MENU flashes on the monitor screen.
3
Press MENU
B
.
The ALARM DATA list appears.
The alarm count, date and time are displayed.
The date and time are displayed up to recent 100
times.
4
Press SEARCH/AUDIO ON to return to the
normal display.
To go to the next page of ALARM DATA
Press MENU
V
.
To return to the MAIN MENU screen from the
current menu
Press MENU.
1 H 1 2 M 0 6 S
A L S C A N
Time
Day-Month
Alarm count (“1” is the
newest data)
3
4 2, 3 1
On the monitor
In the display window