Sony SVT-N72P, Service Manual

Page: 33 / 90

2-17
SVT-N72P (E)
3-6. FE Head and ACE Head
3-6-1. Audio R/P Head Assembly (ACE Head)
1. Unplug the connector from the audio R/P head assem-
bly (ACE head).
2. Remove the two screws
1
, then remove the audio R/P
head assembly (ACE head)
2
and the washer
3
.
Assembly Notes:
1. Align the hole
4
on the audio R/P head assembly
(ACE head) with the pin
5
on the chassis unit.
2. After assembly, check that the clamp
6
on the cleaner
roller assembly has snapped into the mounting of the
audio R/P head assembly (ACE head)
2
.
3. After assembly, clean the surface of the head with a
soft cloth or chamois.
4. After assembly, refer to Section 4-3, and adjust the
head height, the azimuth and the tracking (X) posi-
tion.
Fig. 3-6-1
3-6-2. Full Erase Head
1. Unplug the connector from the full erase head
1
.
2. Remove the screw
2
and the full erase head
1
.
Assembly Note:
1. After assembly, clean the full erase head
1
.
Fig. 3-6-2
1
Screws
2
Audio R/P head assembly
(ACE head)
4
Hole
3
Washer
5
Pin
6
Clamp
1
Full erase head
2
Screw