Sony SVT-L400, Operating Instructions Manual

Page: 39 / 128

39
CLOCK SET IN/OUT Terminals
You can set the clock of this unit using an external
switch.
When you use one unit as the master VCR, you can set
the clock of the units connected to the master VCR
using the master VCR.
When Using an External Switch
When Using One Unit as a Master VCR
1
Press MENU until the SET UP 3 display appears
on the screen.
2
Press SHIFT
$
to move the flashing to EXT TIME
ADJ. and set the time for clock setting by pressing
REC/PLAY SPEED +/–.
3
Press SEARCH to return to the normal display.
4
When using an external switch:
When you turn the switch on and an input signal is
received at the CLOCK SET IN terminal, the
clocks of all the connected VCRs will be set to the
time adjusted in step 2.
When using one unit as the master VCR:
When the clock of the master VCR comes to the
time adjusted in step 2, the signal will be output
from the CLOCK SET OUT terminal to set the
clocks of the other connected VCRs.
to CLOCK SET IN
to CLOCK SET IN
to CLOCK SET OUT
to CLOCK SET OUT
Master VCR
to CLOCK SET IN
to CLOCK SET IN
to CLOCK SET OUT
to CLOCK SET OUT
External switch
to CLOCK SET IN
to COM
<SET UP 3>
ALARM MODE
ALARM SPEED
ALARM DURATION
EXT TIME ADJ.
TAPE IN MODE
TAPE END MODE
TAPE END OUT
CLOG DETECT.
SERIES REC
RS-232C
Y1
6H
20S
01:00
STOP
REW
-3M
Y
N
9600