Wall-Mount Bracket
4-092-246-
21
(1)
10
(GB)
3
Adjust the angle of the arms.
1
Take out the screws from the right and left sides of
the arm base. Then choose the notch corresponding
to the desired angle (0, 5, 10, 15 or 20 degrees) and
fit the arm base to it.
2
Firmly secure each arm base using the screws taken
out in Procedure
1
.
Note
Be sure to adjust the angles of the right and the left
arms to the same angle.
• 0 degrees: Leave the white screws as they
are tightened.
• Other than 0 degrees: Take out the white
screws.
SU-PW1_AEP_Eng
10/15/02, 4:27 PM
10
