Sony STR-ZA1000ES User Manual Download

Page: 165 / 187

the receiver is in the standby mode.

[155] Troubleshooting

Tuner

The FM reception is poor.

Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM

antennas (aerial) as shown below.

Receiver

Outdoor FM antenna (aerial)

[156] Troubleshooting

Tuner

The FM stereo reception is poor.

Set FM mode to monaural.

[157] Troubleshooting

Tuner

You cannot tune to radio stations.

Check that the antennas (aerials) are connected securely. Adjust the antennas (aerials)

and connect an external antenna (aerial) if necessary.

The signal of the stations is too weak with automatic tuning. Use direct tuning.

Make sure you set the tuning scale correctly (when tuning to AM stations with direct

tuning).

No stations have been preset or the preset stations have been cleared (when tuning by

scanning preset stations is used). Preset the stations.

Press DISPLAY repeatedly on the receiver so that the frequency appears on the display

Summary of Contents for STR-ZA1000ES




























































































































































































Search results

Summary of Contents for STR-ZA1000ES

Reviews:

Related manuals for STR-ZA1000ES

Brands by name

Popular brands

Sony STR-ZA1000ES, User Manual

Search results

Summary of Contents for STR-ZA1000ES

Reviews:

Related manuals for STR-ZA1000ES

Brands by name

Popular brands