SERVICE MANUAL
MICROFILM
STR-VX500
E Model
FM STEREO/FM-AM RECEIVER
SPECIFICATIONS
This set is the tuner and amplifier
section in MHC-VX500.
Amplifier section
The following measured at AC 120, 220, 240V 50/60 Hz
DIN power output (Rated) (FRONT)
120 + 120W (6
Ω
at 1kHz DIN)
Continuous RMS power output (Reference)
FRONT SPEAKER: 150 + 150W
(6
Ω
at 1kHz, 10% THD)
Inputs
MD/VIDEO 1 IN (phono jacks): voltage
450/250mV, impedance 47k
Ω
AV INPUT AUDIO (phono jacks): voltage
250mV, impedance 47k
Ω
MIX MIC 1/2 (phone jack): sensitivity 1mV,
impedance 10k
Ω
Output
MD/VIDEO 1 OUT (phono jacks): voltage
450/250mV, impedance 1k
Ω
PHONES (stereo phone jack): accepts
headphones of 8
Ω
or more.
FRONT SPEAKER:
accepts impedance of 6 to 16
Ω
REAR SPEAKER:
accepts impedance of 16
Ω
SUPER WOOFER:
Voltage 1V, impedance 1k
Ω
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0MHz
Antenna terminals
75
Ω
unbalanced
Intermediate frequency
10.7MHz
AM tuner section
Tuning range
MW: 531 – 1,602kHz (with the MW tuning
interval set at 9kHz)
530 – 1,710kHz (with the MW tuning
interval set at 10kHz)
SW: 5.95 – 17.90MHz (with the SW tuning
interval set at 5kHz)
Intermediate frequency
450kHz
Antenna
AM loop antenna External antenna terminal
General
Power requirements
120V, 220V or 230 – 240V AC, 50/60Hz
Adjustable with voltage selector
Power consumption
290W
Dimensions (w/h/d)
Approx. 288
×
205
×
375mm
Mass
Approx. 8.6kg
Design and specifications are subject to change without notice.