manualshive.com logo in svg

Sony STR-GA9ESG, Operating Instructions Manual, Page: 7 / 58

Share
Download
Sony STR-GA9ESG Operating Instructions Manual Download Page 7

7

Unpacking

Check that you received the following items with the
receiver:
• FM wire antenna  (1)
• AM loop antenna  (1)
• Remote commander RM-VP1 (remote)  (1)
• Size AA (R6) batteries  (2)
• Remote control (RC) antenna (1)
• IR repeater (1)
• Getting Started and Basic Operation Guide (1)

Hookup Overview

The receiver allows you to connect and control the

following audio/video components.  Follow the
hookup procedures for the components that you want
to connect to the receiver on the pages specified.  To
learn the locations and names of each jack, see “Rear
Panel Descriptions” on page 51.

Getting Started

Front

speaker

(L)

Front

speaker

(R)

Speaker

System
Hookups (10)

Rear

speaker

(L)

Rear

speaker

(R)

IR Repeater

Hookups (8)

VCR

LD player

TV

TV/VCR Hookups (12)

Antenna Hookups (9)

AM/FM antenna

RC Antenna

Hookups (8)

CD player

Tape deck

DAT/MD deck

Turntable

Center

speaker

Active

woofer

Video camera

Video game

TV/VCR

Hookups (12)

Audio Component

Hookups (9)

Before you get started

• Turn off the power to all components before making

any connections.

• Do not connect the AC power cords until all of the

connections are completed.

• Be sure to make connections firmly to avoid hum

and noise.

• When connecting an audio/video cable, be sure to

match the color-coded pins to the appropriate jacks
on the components:  Yellow (video) to Yellow;  White
(left, audio) to White;  and Red (right, audio) to Red.

Summary of Contents for STR-GA9ESG



























































Reviews:

No comments