manualshive.com logo in svg

Sony STR-GA9ESG, Operating Instructions Manual, Page: 13 / 58

Share
Download
Sony STR-GA9ESG Operating Instructions Manual Download Page 13

13

VCR (via the VIDEO 1 jacks)

If you have two VCRs connect the second one to the VIDEO
2 jacks. If one of them has a StarSight tuner, be sure to
connect that one to the VIDEO 1 jacks.

LD player

Video camera recorder/Video game

Use the (VIDEO 3) input jacks on the front panel.

You can play decoded Dolby Digital AC-3
soundtracks through the speakers connected to the
receiver.

If you have a Dolby Digital AC-3 decoder you can use
the receiver to amplify a decoded Dolby Digital AC-3
soundtrack with the following connections (see pages 23
and 46 for details regarding operation).

Where do I go next?

Go on to the next section to connect the AC power cord and
complete your home theater system.

AC Hookups

Connecting the AC power cord

Connect the AC power cord from this receiver and

from your audio/video components to a wall outlet.

If you connect other audio components to the

SWITCHED AC OUTLET(s) on the receiver, the
receiver can supply power to the connected
components so you can turn on/off whole system
when you turn on/off the receiver.

Caution

Make sure that the power consumption of the component(s)

connected to the receiver’s AC outlet(s) does not exceed the
wattage indicated on the rear panel. Do not connect high-
wattage electrical home appliances such as electric irons,
fans, or TVs to this outlet.

Where do I go next?

Before you use the receiver, go to the next section to make

sure that all the controls are set to the appropriate positions.

Before You Use Your Receiver

Before you start using your receiver, make sure that

you have:

• Turned MASTER VOL to the leftmost position (0).
• Selected the appropriate speaker system. (For

details, see “Selecting the speaker system” on page
11.)

• Set BALANCE to the center position.

Getting Started

SWITCHED AC OUTLET(s)

/

to a wall
outlet

Receiver

LD

L

R

L

R

LD

OUTPUT

VIDEO

IN

AUDIO

IN

VIDEO

AUDIO

IN

Receiver

VCR

OUTPUT

VIDEO

VIDEO

AUDIO

AUDIO

VIDEO 1

VIDEO

IN

VIDEO

OUT

AUDIO

IN

AUDIO

OUT

L

R

L

R

INPUT

IN

OUT

Video camera recorder

or video game

5.1 INPUT

CENTER

WOOFER

REAR

FRONT

CENTER

WOOFER

REAR

FRONT

PRE OUT

Receiver

Dolby Digital AC-3

decoder (etc.)

VIDEO 3 INPUT

S VIDEO

VIDEO

L    AUDIO    R

OUTPUT

VIDEO

AUDIO

L

R

Receiver

(Front panel)

Summary of Contents for STR-GA9ESG



























































Reviews:

No comments