manualshive.com logo in svg

Sony STR-DN1080, Manual

The Sony STR-DN1080 is a high-quality AV receiver for immersive home entertainment. With advanced features for exceptional audio and video performance, this product offers an unparalleled cinematic experience. Easily access the user manual for free download, available exclusively at manualshive.com. Experience optimal audiovisual capabilities with the Sony STR-DN1080.

Share
Download
background image

Check [Network Connection Status]. If [Not accessible] or [Failed] appears, set up the
network connection again.
If the receiver is connected to a wireless network, move the receiver and the wireless LAN
router/access point closer to each other.
If your contract with your Internet provider limits Internet connection to one device at a time,
this device will not be able to access the Internet when another device is already connected.
Consult your carrier or service provider.

[290] Troubleshooting

Music services

The sound skips.

The bandwidth of your network may be too low. If using wireless LAN connection, move the
receiver and the wireless LAN router/access point closer to each other, without any
obstructions between them.

[291] Troubleshooting

BLUETOOTH device

Pairing cannot be done.

Move the BLUETOOTH device closer to the receiver.
Pairing may not be possible if there are other BLUETOOTH devices near the receiver. In
this case, turn off the other BLUETOOTH devices.
Correctly enter the same passkey that was entered on the BLUETOOTH device.

[292] Troubleshooting

BLUETOOTH device

Cannot make a BLUETOOTH connection.

Confirm that the BLUETOOTH mode is selected correctly.
The BLUETOOTH device you attempted to connect does not support the A2DP profile, and
cannot be connected with the receiver.
Press CONNECTION 

 PAIRING BLUETOOTH on the receiver to connect to the last

connected BLUETOOTH device.
Turn on the BLUETOOTH function of the BLUETOOTH device.
Establish a connection from the BLUETOOTH device.
The pairing registration information has been erased. Perform the pairing operation again.
While connected to a BLUETOOTH device, this receiver cannot be detected.
Erase the pairing registration information of the BLUETOOTH device and perform the
pairing operation again.

[293] Troubleshooting

BLUETOOTH device

Summary of Contents for STR-DN1080






























































































































































































































Reviews:

No comments

Related manuals for STR-DN1080

Eclipse AVN20D Manual preview
AVN20D
Brand: Eclipse Pages: 86
Panasonic CZ-RWSC3 Installation Instructions Manual preview
CZ-RWSC3
Brand: Panasonic Pages: 7
Da-Lite Lectern Instruction Book preview
Lectern
Brand: Da-Lite Pages: 8
D+M Group AVR-1612 Manual preview
AVR-1612
Brand: D+M Group Pages: 18
Datawell 45100 Manual preview
45100
Brand: Datawell Pages: 37
Fender Passport 500 Pro Instruction Manual preview
Passport 500 Pro
Brand: Fender Pages: 4
Streetwize SWDAB1 Manual preview
SWDAB1
Brand: Streetwize Pages: 2
Axxera AV714BH Installation & Owner'S Manual preview
AV714BH
Brand: Axxera Pages: 32
PCB Piezotronics JM353B18 Installation And Operating Manual preview
JM353B18
Brand: PCB Piezotronics Pages: 17
Laser SPK-F220 Quick User Manual preview
SPK-F220
Brand: Laser Pages: 3
Trantec S-D7802 Instruction Manual preview
S-D7802
Brand: Trantec Pages: 22
Quatech Wireless A/V Sender 2.4GHz User Manual preview
Wireless A/V Sender 2.4GHz
Brand: Quatech Pages: 8
Mpow MBR2 User Manual preview
MBR2
Brand: Mpow Pages: 12
Panduit ATLONA HDR-EX-70-2PS Installation Manual preview
ATLONA HDR-EX-70-2PS
Brand: Panduit Pages: 12
Alpine CDA-7832R Manual For Installation And Connections preview
CDA-7832R
Brand: Alpine Pages: 2
CaryMart S2UA-DC-ANT3 Manual preview
S2UA-DC-ANT3
Brand: CaryMart Pages: 4
Jensen JBS-230 User Manual preview
JBS-230
Brand: Jensen Pages: 20
Chrysler AUX-CH3 Installation Manual preview
AUX-CH3
Brand: Chrysler Pages: 4

Brands by name

Popular brands

Load more brands