23
GB
Ge
tting Star
te
d
6: Preparing the receiver
and the remote
Connect the AC power cord (mains lead) to a
wall outlet.
Notes
• Before connecting the AC power cord (mains
lead), make sure that the stripped end of the
speaker cords are not touching each other between
the speaker terminals.
• Connect the AC power cord (mains lead) firmly.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1
Press
?
/
1
to turn off the
receiver.
2
Hold down
?
/
1
for 5 seconds.
“PUSH” and “ENTER” appears on the
display alternately.
3
Press MEMORY/ENTER.
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
Connecting the AC power cord
(mains lead)
ROUND
L
L
R
AKERS
FRONT
AC power cord (mains lead)
To the wall outlet
Performing initial setup
operations
?/1
PHONES
INPUT SELECTOR
INPUT MODE
TUNING MODE
MASTER VOLUME
DISPLAY
DIMMER
MUTING
MEMORY/
ENTER
2CH/
A.DIRECT
A.F.D.
MOVIE
MUSIC
TUNING
?
/
1
MEMORY/ENTER
Summary of Contents for STR DH500 - A/V Receiver
Page 71: ......
