Sony STR-DB895D Operating Instructions Manual Download Page 55

Page: 55 / 68

Ope

tions

ing

the
Re

RM-AAP0

masterpage:Right

lename[E:\SEM_Janet\Data_DB895D\J9050665_2598514111DB895DCEL\2598514111\GB08

REM_STR-DB895D-CEL.fm]

model name1[STR-DB895D]

[2-598-514-

(1)]

Tips

• You need to assign a component to the AUX and

MULTI CH buttons before you can use the buttons to
control your audio/video equipment. For details,
refer “Programming the remote” on page 56.

• To activate the buttons with orange printing, press

ALT first before pressing the buttons.

• Before you use the

buttons for receiver

operation, press MAIN MENU. To operate other
components, press TOP MENU/GUIDE or AV
MENU after pressing the input button.

Notes

• The 12, AUX and SOURCE buttons on the remote

are not available for receiver operation.

• Some functions explained in this section may not

work depending on the model.

• The above explanation is intended to serve as an

example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.

• When you press input buttons (VIDEO1, VIDEO2,

VIDEO3, TV/SAT or DVD), the input mode of the
TV might not switch to the corresponding input
mode that you want. In this case, press TV/VIDEO
button to switch the input mode of the TV.

Remote
Button

Operations

Function

VCR/
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck/
Blu-ray disc
recorder/
Hard disc
recorder/PSX

Stops playback.

Satellite tuner/
VCD player/
LD player/
DVD player/
Blu-ray disc
recorder/
Hard disc
recorder/PSX

Returns to the previous
menu or exits the menu.

Receiver

Selects a menu item.

Receiver

Adjusts or changes the
setting.

VCR/
Satellite tuner/
DVD player/
Blu-ray disc
recorder/
Hard disc
recorder/PSX

Selects a menu item.

-/--

TV/
Satellite tuner/
Blu-ray disc
recorder/
Hard disc
recorder/PSX

Selects the channel
entry mode, either one
or two digit.

GB01COV_STR-DB895D-CEL.book Page 55 Wednesday, June 15, 2005 9:28 AM

Summary of Contents for STR-DB895D





































































Search results

Summary of Contents for STR-DB895D

Reviews:

Brands by name

Popular brands

Sony STR-DB895D, Operating Instructions Manual

Search results

Summary of Contents for STR-DB895D

Reviews:

Brands by name

Popular brands