87
US
U
s
ing O
th
e
r
Fe
ature
s
When sleep timer is being used, “SLEEP”
lights up in the display window of the
receiver.
To check the remaining time before the
receiver turns off, press SLEEP. The
remaining time appears on the display
window. If you press SLEEP again, the
sleep timer is set to “OFF.”
Recording using the
receiver
You can record from a video/audio equipment
using the receiver. Refer to the operating
instructions supplied with your recording
equipment.
1
Select “Watch” from the home
menu, then press
.
2
Select the playback equipment,
then press
.
3
Prepare the equipment for
playing.
For example, insert the video tape you
want to copy into the VCR.
4
Prepare the recording
equipment.
Insert a blank video tape, etc., into the
recording equipment (VIDEO 1) for
recording.
5
Start recording on the
recording equipment, then start
the playback equipment.
You can record with an audio equipment using
the receiver. Refer to the operating instructions
supplied with your MD deck or tape deck.
1
Select “Listen” from the home
menu, then press
.
2
Select the playback equipment,
then press
.
3
Prepare the playback
equipment for playing.
For example, insert a CD into the CD
player.
4
Prepare the recording
equipment.
Insert a blank MD or tape into the
recording deck and adjust the recording
volume level.
5
Start recording on the
recording deck, then start the
playback equipment.
Switching the command
mode of the receiver and
the remote control
You can switch the command mode
(COMMAND MODE AV1 or COMMAND
MODE AV2) of the receiver and the remote
control.
Switch the command mode from the factory
default setting to the appropriate setting, if
other Sony equipment is operated accidentally
by the same remote control, when you are
operating the receiver using the remote control
supplied with the receiver.
Recording with a video
equipment
Recording with an audio
equipment
continued
