97
GB
Us
ing O
th
e
r
Fe
atures
• If the TV is turned on before turning on the
receiver, the TV sound will not be output for a
moment.
When you turn the TV off by using the power
button on the TV’s remote, the receiver and
the connected components turn off
automatically.
You can also use the multifunction remote to
turn off the TV.
Press TV, then press AV
?
/
1
.
The TV, receiver and connected components
are turned off.
Notes
• Set the TV power supply interlock function to on
before using the System Power Off function. For
details, refer to the operating instructions of the
TV.
• Depending on the status, the connected
components may not be turned off. For details,
refer to the operating instructions of the connected
components.
Press the THEATER button on the
remote of the receiver, TV, or the
Blu-ray Disc Player, while pointing
the remote toward the TV.
The sound field switches to HD-D.C.S.
To return to the previous sound field, press the
THEATER button again.
Note
The sound field may not switch depending on the
TV.
Tip
The sound field may be changed back to the
previous one when you change the TV’s input.
Outputting the HDMI
signals even when the
receiver is in standby
mode
(Pass Through)
You can output the video and audio signals
from the HDMI IN jack to the TV connected to
the HDMI OUT jack even when the receiver is
in standby mode.
When you activate this function, make the
settings for “Pass Through” following the
steps below.
1
Select “
Settings” from the
menu, then press
or
b
.
2
Select “HDMI,” then press
or
b
.
Turning off the receiver with the
TV (System Power-Off)
Enjoying movies with the
optimum sound field (Theater
Mode Sync)
TV
AV
?
/
1
V
/
v
/
b
,
MENU
continued
Summary of Contents for STR-DA3600ES - Multi Channel Av Receiver
Page 162: ...162GB ...
