Sony STR-DA3000ES, Service Manual

Page: 166 / 168

2
STR-DA3000ES
Items Display Remark
Protector on/off SPECIAL XXX: ON or OFF (switching with
[--/+]
dial)
PROTECTOR ON/OFF [XXX]
Model version display SPECIAL ####: model
#### **** vX.XX @@@@ **** : destination
X.XX: main microprocessor software version
@@@@: Sum value of flash memory in the main microprocessor
Model/distination change SPECIAL ####: model, **** : destination, XX: at or fx
MODEL [####
****
] XX
(switching with
[--/+]
dial)
FL display fonts test SPECIAL ** : 20 to 1F, X: character (switching with
[--/+]
dial)
FL FONT 0x ** = [X]
FL display test ALL ON Each time
[DISPLAY]
button to change as follows.
all on
t
test pattern 1
t
test pattern 2
t
all off
t
all on
Audio swap SPECIAL Switching with
[--/+]
dial
SWAP [XXXXXXXXXXX]
DSP reset SPECIAL XXX: ON or OFF (switching with
[--/+]
dial)
DSP RESET [XXX]
Note: Since it continues being reset when “DSP RESET [ON]”
is chosen, be sure to return to “DSP RESET [OFF]”
DSP 1 IRAM DSP 1 IRAM The umbers which can be changed will blinks
I [ *****
]= XXXX
To select the digit: Press the
[]
or
[TUNING --]
button
To select the number when the umbers ( ***** or XXXX) blinks:
Rotate the
[--/+]
dial
To perform the write when the umbers (XXXX) blinks:
Press the
[MEMORY/ENTER]
button
***** : instruction RAM address
XXXX: instruction RAM address data
Note: When parenthesis is the position of instruction RAM
address data, up/down of the menu item by the
[MENU]
dial
are invalid
DSP 1 ARAM DSP 1 ARAM The umbers which can be changed will blinks
D [ *****
]= XXXXXXXX
To select the digit: Press the
[]
or
[TUNING --]
button
To select the number when the umbers ( ***** or XXXXXXXX)
blinks: Rotate the
[--/+]
dial
To perform the write when the umbers (XXXXXXXX) blinks:
Press the
[MEMORY/ENTER]
button
***** : coefficient RAM address
XXXXXXXX: coefficient RAM address data
Note: When parenthesis is the position of coefficient RAM
address data, up/down of the menu item by the
[MENU]
dial
are invalid
DSP 2 IRAM DSP 2 IRAM The umbers which can be changed will blinks
I [
*****
]= XXXX
To select the digit: Press the
[]
or
[TUNING --]
button
To select the number when the umbers ( ***** or XXXX) blinks:
Rotate the
[--/+]
dial
To perform the write when the umbers (XXXX) blinks:
Press the
[MEMORY/ENTER]
button
*****
: instruction RAM address
XXXX: instruction RAM address data
Note: When parenthesis is the position of instruction RAM
address data, up/down of the menu item by the
[MENU]
dial
are invalid
SPECIAL MENU MODE
Procedure:
1. Press the
I
/
1 button to turn on the main power, then while pressing the
[MEMORY/ENTER]
button, press the
[MOVIE]
button in order.
2. The message “MENU EXPANDED !” appears.
3. Each time the
[MENU]
dial is turned clockwise, the item is switched in order as follows.
4. To release from this mode, while pressing the
[MEMORY/ENTER]
button, press the
[MOVIE]
button in order again.
5. The message “MENU EXPAND OFF” appears.