19
SRX Controller Adjustments and Settings
Adj
u
s
tme
nts
and
S
e
ttin
gs
Adjustments and Settings
SRX Controller
Adjustments and
Settings
Adjustments and settings are performed in the various tabs
of the SRX Controller screen.
This section describes the setting items in each tab.
Items that cannot be adjusted
Depending on the input signal, some setting items cannot
be configured. Setting items that cannot be configured will
not appear in the SRX Controller screen.
Storing Setting Values
Settings and adjustments configured for the projector can
be registered to a FUNCTION to be recalled whenever
necessary.
You can register up to 8 FUNCTIONs (FUNCTION 1 to
FUNCTION 8).
Registering setting values to FUNCTIONs
Setting values are stored to FUNCTION 1 under factory
default conditions.
To register additional FUNCTIONs, perform the
following.
1
Select the FUNCTION you want to register in the
[FUNCTION] drop-down list.
2
Perform adjustments and settings in each tab.
The current setting values will be stored to the
selected FUNCTION.
Recalling FUNCTIONs
Select the FUNCTION you want to recall in the
[FUNCTION] drop-down list.
Notes
When you switch to a different FUNCTION, the image
will temporarily enter the muting state for up to about
10 seconds. Afterward, the image will appear according to
the selected settings.
Summary of Contents for SRXT615
Page 30: ...Sony Corporation ...
