Digital-Video Performance
Sampling frequency
Quantization
Compression
Channel coding
Error correction
Error concealment
Analog Composite-Output Performance
Bandwidth
S/N ratio
Y/C delay
K Factor (2T Pulse)
Output SCH phase
Digital-Audio Performance
Sampling frequency
Quantization
Wow & flutter
Headroom
Analog Audio-Output Performance
D/A quantization
Frequency response
Dynamic range
Distortion
Crosstalk
De-emphasis
Supplied Accessories
Y: 74.25 MHz, Pb/Pr: 37.125 MHz
10 bits/sample
MPEG-4 Studio Profile
S-NRZ
Reed-Solomon code
Adaptive three-dimensional
Y: 0 to 5.75 MHz +5.0 dB/-3.0 dB
56 dB or more
15 ns or less
1 % or less
Based upon RS-170A/CCIR R.624-3
48 kHz (synchronized with video)
24 bits/sample
Below measurable level
20 dB (or 18 dB selectable)
24 bits/sample
20 Hz to 20 kHz, +0.5 dB/-1.0 dB (0 dB at 1 kHz)
More than 100 dB (At 1 kHz)
Less than 0.05 % (At 1 kHz, reference level)
Less than –90 dB (At 1 kHz, between any two channels)
T1 = 50 µs, T2 = 15 µs (auto on/off)
PSW4 x 16screws, for rack mounting (4)
Memory Stick/PC Card adapter (1)
CD-ROM (Operation manual & Maintenance manual part 1)
Optional Accessories
BCT-6/33/40SR, BCT-64/94/124SRL,
HDCAM-SR Video Cassette Tapes
SRT-50CA, SRT-155CAL,
HDCAM-SR Video Cassette Tapes
HKDV-900,
HD Digital Video Controller
BCT-HD12CL,
Video Head Cleaning Cassette
HKSR-5002,
Digital BETACAM Processor Board
HKSR-5003,
RGB Processor Boards
HKSR-5001,
Format-Converter Board
RMM-110,
Rack-Mount Kit
SRW-5000 Specifications
11
General
Power requirements
Power consumption
Operating temperature
Storage temperature
Operating humidity
Mass (approx.)
Dimensions
(W x H x D excluding protrusions)
Tape speed
Digital recording/Playback time
Fast-forward/rewind time
Search-speed range
Servo-lock time
Load/unload time
Input/Output
HD serial V/A input
HD/SD reference video input 1
HD/SD reference video input 2
(optional HKSR-5001 required)
Digital-audio input (CH1/2, CH3/4,
CH5/6, CH7/8, CH9/10, CH11/12)
Time-code input
HD serial V/A output
Format-converter output
(optional HKSR-5001 required)
Standard-definition V/A output
Analog I/O down-converted
output
Analog I/O reference output
Digital-audio output (CH1/2 CH3/4
CH5/6 CH7/8 CH9/10 CH11/12)
Analog-audio output
(CH1/2/3/4/Cue)
Monitor output (L/R)
Time-code output
Phones
Remote 1 input
Remote 1 input/output
RS-232C
Video control
Parallel remote
Network
100 to 240 V AC (±10 %, 50/60 Hz)
230 W
+ 5 °C to +40 °C (+41 °F to +104 °F)
-20 °C to +60 °C (-4 °F to +140 °F)
25 % to 80 % (relative humidity)
30 kg (66 lb. 2 oz)
427 x 218 x 544 mm (16 3/4 x 8 5/8 x 21 1/2 inches)
94.2 mm/s (24P mode)
155 min with BCT-124SR cassette (24P mode)
Approx. 3 min with BCT-124SR cassette
±50 times normal playback speed (24P mode)
1.0 sec or less (from standby on)
6.0 sec or less
BNC (x1 with monitoring loop-through), Serial digital (1.485 Gb/s),
SMPTE 292M/BTA S-004/ITU-R.BT 709
BNC (x1, with loop-through), Tri Level sync, 0.6 Vp-p, 75 Ω,
sync negative or Black Burst, 0.286 Vp-p, 75 Ω, sync negative
BNC (x1, with loop-through), Black Burst, 0.286 Vp-p,
75 Ω, sync negative
BNC (x6, AES/EBU)
XLR-3-pin type, (female x1), 0.5 to 18 Vp-p, 10 kΩ, balanced
BNC (x3, with character out), Serial digital (1.485 Gb/s),
SMPTE 292M/BTA S004/ITU-R.BT 709
BNC (x2), with character out
BNC (x3, with character out), D1 serial digital (270 Mb/s),
SMPTE 259M
Composite: BNC (x1 with character out) 1.0 Vp-p, 75 Ω, sync negative)
SD sync: BNC (x1, Black Burst, 0.286 Vp-p, 75 Ω, sync negative)
1125 Sync: BNC (x2), Tri Level sync, 0.6 Vp-p, 75 Ω, sync negative
BNC (x6), AES/EBU, unbalanced
XLR-3-pin type, (male x5), +4 dBm, (with a 600 Ω load),
low impedance, balanced
XLR-3-pin type, (male x2), +4 dBm, (with a 600 Ω load),
low impedance, balanced
XLR-3-pin type, (male x1), 2.2 Vp-p low impedance, balanced
JM-60 stereo phone jack, - ∞ to –12 dBu (with an 8 Ω load),
unbalanced
D-sub 9-pin, (female), Sony 9-pin remote interface
D-sub 9-pin, (female), Sony 9-pin remote interface
D-sub 9-pin, (male)
D-sub 9-pin, (female), (for optional HKDV-503)
D-sub 50-pin, (female)
10Base-T modular jack