Hint
Some BLUETOOTH mobile phones have handset use priority when receiving a call. In the case of the HFP or HSP connection, switch the call
device to the speaker by pressing and holding the
(call) button for about two seconds or operating your BLUETOOTH mobile phone.
The volume of music playback and calling is set independently in the speaker.
If the caller cannot hear or can barely hear your voice, talk more directly into the microphone of the speaker.
Note
When using the Speaker Add function, sound of the phone call is output from only the speaker where the (BLUETOOTH) indicator is lit.
If no ring tone is heard via the speaker
The speaker may not be connected with a BLUETOOTH mobile phone with HFP or HSP. Check the connection
status on the BLUETOOTH mobile phone.
Switch the call device to the speaker by pressing and holding the
(call) button for about two seconds.
Adjust the volume by pressing the –/+ (volume) buttons on the speaker or operating the BLUETOOTH
mobile phone.
When you press the –/+ (volume) buttons on the speaker or adjust the volume on the BLUETOOTH mobile phone, the
(power) indicator flashes once in green. When you set the volume to the maximum or minimum, the (power) indicator
flashes three times in green.
3
To end a call, press the
(call) button.
If you were listening to music before the call, playback will resume when the call ends.
If you end a call by operating the BLUETOOTH mobile phone, playback will also resume when the call ends if you were
listening to music before the call.
4
62
