When the speaker, that had been used as the Speaker Add function the last time, is turned on, the speaker will try to establish the Speaker Add
function with the other speaker that had been connected. If you want to use two SRS-XB2 speakers as the Speaker Add function again, turn the
other speaker on within a minute, otherwise the speaker will terminate the automatic connection as the Speaker Add function.
If you want to use the speaker that had been used as one of the speakers of the Speaker Add function by itself, press the (power) button to turn
on the speaker, then press and hold the ADD button until a beep is heard to terminate the Speaker Add function since the speaker tries to
establish the last-made connection.
When using the Speaker Add function, switch the codec to SBC.
Note
If you reset or initialize one of the two speakers while using the Speaker Add function, make sure to turn off the other speaker. If you do not turn
off the other speaker before restarting the Speaker Add function, there may be problems in making a BLUETOOTH connection and outputting
sound.
When you make a BLUETOOTH connection by One-touch (NFC), touch the speaker where the (BLUETOOTH) indicator is lit. The device
cannot make a BLUETOOTH connection with the speaker where the
(
BLUETOOTH) indicator is turned off.
Related Topic
Switching between double mode and stereo mode (Speaker Add function)
4-587-625-11(2) Copyright 2016 Sony Corporation
55
