Sony SRS-X88 Help Manual Download

Page: 295 / 364

Keep the removed grille on a flat surface to prevent distortion.

Note

Do not touch the exposed part of the speaker (speaker units) after removing the speaker grille.

What you can do with the speaker and remote control during playback

You can adjust the volume using the VOL (volume) –/+ buttons of the speaker or the /- buttons of the remote

control.

You can also use the MUTING button,

(Play/Pause) button, and

(Previous/Next) button of the

remote control.

Note

If there is noise, turn off the iPhone/iPad/iPod once, then turn it on again.

The speaker supports only audio playback functions of an iPhone/iPad/iPod.

Do not connect a non-supported iPhone/iPad/iPod. Sony does not guarantee correct operation of a non-supported

iPhone/iPad/iPod.

Sony is not responsible for any loss or damage to data in an iPhone/iPad/iPod that is connected to the speaker.

Do not disconnect an iPhone/iPad/iPod during operation. To prevent damage to data, stop playback, then turn off the

power of the speaker before disconnecting the iPhone/iPad/iPod.

If sound is distorted, set the equalizer of your iPhone/iPad/iPod to “Off” or “Flat.”

Turn on the power of the iPhone or iPod touch before connecting it to the speaker; otherwise, operation will not be

possible.

Depending on the connected iPhone/iPad/iPod, loud sound may suddenly be output when the volume is adjusted.

For details on operation of the iPhone/iPad/iPod, refer to its operation manual.

Summary of Contents for SRS-X88




















































































































































































































































































































































Search results

Summary of Contents for SRS-X88

Reviews:

Related manuals for SRS-X88

Brands by name

Popular brands

Sony SRS-X88, Help Manual

Search results

Summary of Contents for SRS-X88

Reviews:

Related manuals for SRS-X88

Brands by name

Popular brands