Sony SRS-X88 Help Manual Download

Page: 200 / 364

Tap to switch the speaker to AUDIO IN mode.

Tap to listen to music in a device connected to the AUDIO IN jack.

The AUDIO IN indicator lights up when tapped.

10. N-Mark

If your smartphone or Walkman is NFC-compatible, touch it on the N-Mark of the speaker. The speaker will turn on

automatically, register (pair) with the device, and a BLUETOOTH connection can be made.

11. Reaction indicator

12. Remote sensor

When the speaker receives signals from the supplied remote control, the reaction indicator (remote sensor) flashes.

Also, the indicator flashes according to the volume adjustment of the speaker.

13. Wi-Fi antenna

Set upright before Wi-Fi connection, as below.

Swing the left side of the antenna outward.

Pull out the antenna slightly until it can be rotated.

Rotate the antenna 90 degrees clockwise.

Set the antenna upright.

14. DC IN 19.5V (power) terminal

Connect the AC adaptor (supplied).

15. AUDIO IN jack

Connect to the headphone jack of a portable audio device, etc., using a audio cable (not supplied).

16. WPS button

Press and hold when connecting to a Wi-Fi network.

After pressing and holding for 2 seconds, beeps will be heard indicating that the speaker is ready to connect to a

wireless router.

If your wireless router has a WPS button, you can use this button to connect to the network.

17. LAN port

Use a commercially-available LAN cable to connect the computer or the wireless router.

18. USB B port (

Connect a computer using a commercially-available USB cable.

When connecting a high-resolution supported Walkman, use the optional High-Resolution Audio USB Adaptor WM-

PORT Cable.

19. USB A port (

Connect a USB flash drive directly. When connecting to an iPhone/iPad/iPod or Walkman, use the cable supplied

with the device.

4-566-484-11(1)

184

Summary of Contents for SRS-X88




















































































































































































































































































































































Search results

Summary of Contents for SRS-X88

Reviews:

Related manuals for SRS-X88

Brands by name

Popular brands

Sony SRS-X88, Help Manual

Search results

Summary of Contents for SRS-X88

Reviews:

Related manuals for SRS-X88

Brands by name

Popular brands