Sony SRR1000, Operation Manual

Page: 57 / 93

57
Detailed Menu Description
C
h
a
p
te
r 5
M
e
nu
It
em
s
VIDEO Menu
The VIDEO menu allows you to adjust video signals.
[F6]
WARNING Sets whether to display a flashing warning message on the second line when an
item other than “Time” is selected with
[F3]
(INFO SEL).
Off
On
I/O
[F10] EXIT Redisplays the previous menu. –
ALT/
[F9]
META
SET Sets uncompressed metadata. I/O
[F1]
LINE1 Sets from which lines to acquire the uncompressed metadata.
In 1080 59.94i, 1080 50i, 23.98P/24P mode:
9H to 16H or 18H to 20H
In 720 59.94P, 720 50P mode:
9H to 16H or 18H to 25H
In
[F2]
LINE2
[F3]
LINE3
[F10]
EXIT Redisplays the previous menu. –
ALT/
[F10]
CHAR ON Sets whether to superimpose the characters representing the time data and
operation status on the signal output from the SD/HD SDI MONITOR connector.
(see page 32)
Off
On
I/O
Button Indication Setting Target
Button Indication Setting Target
[F1]
MASTER Simultaneously adjusts the Y, PB, and PR levels of the HD video signal output via
the SD/HD SDI OUT connectors.
(see page 50)
0.0 to 100% (4000H) to 141.3% (5A70H)
Out
[F2]
Y Adjusts the Y level of the HD video signal output via the SD/HD SDI OUT
connectors.
(see page 50)
0.0 to 100% (4000H) to 141.3% (5A70H)
Out
[F3] PB Adjusts the Pb level of the HD video signal output via the SD/HD SDI OUT
connectors.
(see page 50)
0.0 to 100% (4000H) to 141.3% (5A70H)
Out
[F4] PR Adjusts the Pr level of the HD video signal output via the SD/HD SDI OUT
connectors.
(see page 50)
0.0 to 100% (4000H) to 141.3% (5A70H)
Out
[F5]
SETUP Adjusts the setup level of the HD video signal output via the SD/HD SDI OUT
connectors.
(see page 50)
–10% to 0.0% to 10.0%
Out
[F6]
BLK LV Adjusts the black level of the HD video signal output via the SD/HD SDI OUT
connectors.
(see page 50)
–31.0% to 0% to 31.0%
Out
[F7]
CRM PH Adjusts the chroma phase of the HD video signal output via the SD/HD SDI OUT
connectors.
(see page 50)
–127 to 0 to 127
Out
[F8] SYNC
PHASE
Adjusts the sync phase of the HD video signal output via the SD/HD SDI OUT
connectors.
(see page 50)
Out
[F8]
SYNC Roughly adjusts the sync phase.
–128 to 0 to 127
Out
[F9]
FINE Finely adjusts the sync phase.
0 to 1024
Out
[F10]
EXIT Redisplays the previous menu. –