32
Superimposing Character Information
Chapt
er
3
Set
ting Up t
he Memor
y
St
or
ag
e Unit
To set the time code being played to
Starting TC
Press the
[F2]
(ENTRY) key. The value of the time code
being played at that time (recorded time code) is set as the
Starting TC.
To set the Jumping TC value
Press the
[F3]
(JUMPING TC) key.
Select any of the following: 0, -3H, 12H, -1H, +1H, +2H,
+3H
To select whether to convert the time code
Press the
[F4]
(CONV) key and select any of the following:
On:
Converts the time code
Off:
Does not convert the time code
Superimposing Character
Information
To superimpose characters representing the time data,
operation mode, and other information on output signals,
set the ALT/
[F10]
(CHAR ON) buttons to On in the TC
menu. Character information is superimposed on signals
output from the SD/HD SDI MONITOR connector.
Contents of superimposed data
The example above shows the factory-set contents of data.
If you change the setting of the ALT/
[F7]
-
[F3]
(INFO
SEL) buttons in the TC menu, a different type of time data
can also be displayed on the second line.
a
Types of time data
Note
Indication
Meaning
TCR
Time code data of LTC reader
UBR
User bit data of LTC reader
TCR.
Time code data of VITC reader
UBR.
User bit data of VITC reader
TCG
Time code data of time code generator
UBG
User bit data of time code generator
TM1
Time counter value that can be preset.
TM2
Time counter value for which the beginning of
the file is 0.
a
Type of time data
Time data
b
Drop frame mark of the time code
reader
c
Drop frame mark of the time
code generator
d
Field mark of the
VITC data
f
Operation mode
e
Port
