Sony SRP-F300, Operating Instructions Manual

Page: 2 / 20

2
Notice for the Customers in the United Kingdom
IMPORTANT
The wires in this mains lead are coloured in accor-
dance with the following code:
Blue:
Neutral
Brown: Live
As the colors of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or
coloured red. Do not connect either wire to the earth
terminal in the plug which is marked by the letter E or
by the safety earth symbol
Y
or coloured green or
green-and-yellow.
WARNING
To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
This symbol is intended to alert the user
to the presence of uninsulated “danger-
ous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instruc-
tions in the literature accompanying the
appliance.
Setting the voltage selector (voltage selector
equipped models only)
Check that the voltage selector on the rear panel is set
to the local power line voltage. If not, set the selector
to the correct position using a screwdriver before
connecting the AC power cord to a wall outlet.
INFORMATION (For the customers in the
United States)
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the follow-
ing measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
– Consult the dealer or an experienced radio / TV
technician for help.
VOLTAGE
SELECTOR
120V 230V
WARNING