16
•
Peak limiter
Instantaneous waveform transformation type peak limiter.
It can be set over a range of –20.0dBs~+6.0dBFs at 0.5dB steps.
When signal reaches the limiting level, the limiter indicator is lit.
•
Delay
Capable of setting delay with 10.4 µsec steps for each channel up to approximately
1.36 sec.
(10.4 µsec is equivalent to approximately 3.6mm in the speed of sound.)
NOTE
The minimum delay time between input and output while using an analog input/
output is about 880 µsec when delay time is set at 0. This delay is caused by
signal’s passing through A/D, D/A converter and the signal processor.
•
Phase
Capable of switching normal or inverse (180°).
•
Muting
Capable of setting for each channel.
Example of waveform of Peak Limiter Processing
Before processing (narrow line)
After processing (wide line)
Summary of Contents for SRP-F300
Page 20: ...Printed in Japan ...
