Sony SPP-A972 - Cordless Telephone With Answering System Page 60 Operating Instructions Manual Download

Page: 60 / 80

Answering Machine Features

Key

(#)(1)

(#)(2)

(#)(3)

(#)(4)

(*)(5)

(#)(5)

(#)(6)

(*)(7)

(#)(7)

(*)(8)

(#)(9)

(#)(0)

Table of control codes

Play back messages in MAILBOX 1

Play back messages in MAILBOX 2

Play back messages in MAILBOX 3

Repeat/skip backward

Get help

Stop operation

Skip forward

Record greeting

Check greeting

Record a memo

Erase individual messages

Turn answering machine on/off

Notes

Plays back from the first new message.

Press during playback to repeat a message. To
skip backward, press within two seconds after
the current message starts.

Press to access simple voice menu. Press again
to access advanced voice menu.

Stops every function

Press during playback to skip forward.

“Now recording” is announced.

Review your greeting

Select the mailbox by entering “1”, “2” or “3”.

Press during playback

Turns the system on/off. “Answer machine on”
or “Answer machine off” is announced.

Picking up new messages

Call your telephone number from a touch-tone phone.

When you hear the greeting, press

(#)

and enter your remote ID code

(security code).
You will hear a confirmation beep.
The number of new messages will be announced.

Press the keys in the “Table of control codes” below for the desired
operation command.

When you are finished, disconnect the line.

Notes

• Do not let two seconds elapse between each digit of the remote ID code (security code) and

the control code.

• If you did not turn on the answering machine, your phone answers automatically after 10

rings.

• If the message recording memory runs out, the answering machine turns off automatically.

“Memory full. Please enter your security code” is announced.

• If you enter wrong remote ID code (security code) three times, the line will disconnect.
• If no keys are pressed within 20 seconds, the line will disconnect.

Tips

• Press

(*)(0)

on the touch-tone keypad or

(PLAY/STOP)

on the base unit to disconnect the

line.

• Cut off the Remote Control Card and carry it with you to see how to operate from an outside

phone.

Operating from an outside phone (continued)

Summary of Contents for SPP-A972 - Cordless Telephone With Answering System

















































































Search results

Summary of Contents for SPP-A972 - Cordless Telephone With Answering System

Reviews:

Related manuals for SPP-A972 - Cordless Telephone With Answering System

Brands by name

Popular brands

Sony SPP-A972 - Cordless Telephone With Answering System, Operating Instructions Manual

Search results

Summary of Contents for SPP-A972 - Cordless Telephone With Answering System

Reviews:

Related manuals for SPP-A972 - Cordless Telephone With Answering System

Brands by name

Popular brands