manualshive.com logo in svg

Sony SNC-WL862, Installation Manual

Share
Download
Sony SNC-WL862 Installation Manual Download Page 2

2

Table of Contents

About the Manuals ....................................................... 2
Location and Function of Part ....................................... 3
Preparations ................................................................. 5

Check the serial number ............................... 5
Connect cable  ............................................... 5
Installing a microSD card .............................. 8
Installing the Camera .................................... 8
Adjustment of the Shooting Direction and 

Range .......................................................... 8

Installing the Dome Cover  ............................ 9
Important precautions .................................10

Connecting to the I/O combo cable ............................. 11
Connection ..................................................................13

Connecting the Power Source ..................... 13
Connecting to 24V AC source ...................... 13
Connecting to the Network  ......................... 13

Assigning the IP address  ............................................13
Specifications ..............................................................14

About the Manuals

Safety Regulations (supplied)

The Safety Regulations describes the secure usage 
of camera. Be sure to read it.

Installation Manual (this document/Web)

This Installation Manual describes the names and 
functions of parts and controls of the Network 
Camera, gives connection examples and explains 
how to set up the camera. Be sure to read the 
Installation Manual before operating.

User’s Guide/Application Guide

• How to control the camera via a web browser
• How to setup the camera
Operate the camera referring to the guide above 
after having installed and connected the camera 
properly based on the Installation manual.

Summary of Contents for SNC-WL862
















Reviews:

No comments

Brands by name

Popular brands

Load more brands