10
Note
Make sure the safety tether wire for the dome cover
does not get caught between the dome cover and
camera unit.
Important precautions
• Despite the fact that this unit is rated IP66, this
section includes important precautions to
prevent any malfunction caused by condensation
and/or water ingress.
• Read the precautions below thoroughly before
installing the unit.
• Make sure to install the camera unit so that the
surface of the connection cables (including
connectors) does not water. Or waterproof
should be performed properly. Otherwise, there
may be a risk that water enters the unit through
these cables.
• Install the mounting plate and the camera on an
even ceiling or wall, etc.
• Install the camera properly, using the screws,
while referring to the Installation Manual.
• Before attaching the dome casing to the camera
unit, make sure the waterproof rubber gasket is
clean and fits in the groove of the joint surface
properly.
• When installing the camera on a wall, install it
with the microphone hole facing down.
