Ot
her
s
Using the Supplied Setup Program
38
Others
This section explains how to use the application
software and commands, including the supplied CD-
ROM.
Using the Supplied
Setup Program
Explains the functions except the Network tab in the
Setup Program.
To install the Setup Program, to assign the IP address
and to set the network, see “Assigning the IP address to
the Camera” on page 8 in “Preparations”.
Starting the Setup Program
Select
Program
from Start menu of Windows, then
select
Program
,
IP Setup Program
and
IP Setup
Program
in sequence.
The IP Setup Program starts.
Network tab appears. The IP Setup Program detects
cameras connected to the local network and lists them
on the Network tab window.
Bandwidth Control Tab
The communication bandwidth can be set when the
Video mode of the camera is set to
JPEG
.
Note
When the Video mode of the camera is set to
MPEG4
,
the bandwidth cannot be changed.
1
Click the Bandwidth control tab to display the
bandwidth setting window.
The current bandwidth is displayed in
Current
bandwidth
.
2
Click to select the camera to set the bandwidth from
the list box.
3
Click to select the desired bandwidth from the
Setting bandwidth
list box.
4
Type the
Administrator name
and
Administrator
password
in each box.
5
Click
OK
.
If “Setting OK” is displayed, the bandwidth setting
is completed.
