O
per
at
ing
t
he
Came
ra
Logging in to Homepage — Welcome Page
12
Operating the Camera
The Operating the Camera section explains how to
monitor the image from the camera using the Web
browser. Use Internet Explorer as the Web browser.
The functions of the camera should be set by the
Administrator. For setting the camera, see
“Administrating the Camera” on page 17.
Logging in to Homepage
— Welcome Page
Logging in as a User
1
Start the web browser on the computer and type the
IP address of the camera you want to monitor.
The welcome page of
Network Camera SNC-M1
or
SNC-M1W
is displayed.
2
Click
Enter
.
The main viewer appears.
Control the camera from the main viewer.
Note
If the Welcome page does not activate correctly, the
security level of the Internet Explorer may be set to
Medium
or higher. See “To display the Welcome page
correctly” on page 10 and check the security level.
Displaying the setting window for
the administrator directly
When the administrator sets the camera functions, the
setting window can be displayed directly from the
welcome page.
1
Click
Setting
on the welcome page.
The following dialog appears.
2
Enter the user name and password for
Administrator, then click
OK
.
The user name “admin” and the password “admin”
are set at the factory for the Administrator. You can
change them on the User setting menu in the
Administrator menu (see page 27).
The Administrator menu appears.
