Sony SLV-X9N ShowView, Operating Instructions Manual

Page: 13 / 96

Getti
ng Sta
rted
13
Setting up the remote commander
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.
To switch to wide mode, see the footnotes below this table for the applicable
code numbers.
* 1 Press WIDE to switch the wide picture mode on or off.
* 2 Press WIDE, then press
2
+/– to select the wide picture mode you want.
* 3 Press WIDE. The menu appears on the TV screen. Then, press
M
/
m
/
<
/
,
to
select the wide picture you want and press OK.
Tip
• When you set your TV’s code number correctly while the TV is turned on, the TV
turns off automatically.
Notes
• If you enter a new code number, the code number previously entered will be
erased.
• If the TV uses a different remote control system from the one programmed to work
with the VCR, you cannot control your TV with the remote commander.
• When you replace the batteries of the remote commander, the code number may
change. Set the appropriate code number every time you replace the batteries.
Manufacturer Code number
Sony 01* 1 , 02
Akai 68
Ferguson 52
Grundig
10*
1
, 11*
1
Hitachi 24
JVC 33
Loewe 45
Mivar 09, 70
NEC 66
Nokia 15, 16, 69* 3
Panasonic 17* 1 , 49
Philips
06*
1
, 07*
1
, 08*
1
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43* 2
Toshiba 38
Manufacturer Code number