Sony SLV-SE80EG Operating Instructions Manual Download Page 80

Page: 80 / 88

Additional Information

Symptom

A tape cannot be inserted.

The remote commander does
not function.

You cannot watch or record
Canal Plus programmes.

“L3” does not appear in the
display window.

The SMARTLINK function
does not work.

The tracking meter does not
appear on the TV screen.

You cannot control other TVs.

The VCR needs to be cleaned.

Others

Remedy

• Check that a tape isn’t already in the tape

compartment.

• Make sure you are pointing the remote commander at

the remote sensor on the VCR.

• Replace all the batteries in the remote commander with

new ones if they are weak.

• Make sure the TV / VIDEO remote control switch is

set correctly.

• Check that the decoder is connected correctly.
• Check that the OPTIONS-2 menu and the TUNER

menu are set correctly.

For details, see page 34.

• Check that DECODER/LINE3 in the OPTION-2 menu

is set to LINE3.

• Check that your TV complies with SMARTLINK,

MEGALOGIC, EASYLINK, Q-Link, or EURO VIEW
LINK.

• Make sure you use the optional EURO-AV cable to

connect the VCR and your TV.

• Make sure the EURO-AV cable is connected securely.

• The recording condition of the tape is very poor and

tracking cannot be adjusted.

• The tracking meter does not appear when playing back

an NTSC-recorded tape.

• Set your TV’s code number. The code number may

change when you replace the batteries of the remote
commander.

• Clean the cabinet, panel and controls with a dry, soft

cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.

Troubleshooting (continued)

Summary of Contents for SLV-SE80EG

























































































Search results

Summary of Contents for SLV-SE80EG

Reviews:

Related manuals for SLV-SE80EG

Brands by name

Popular brands

Sony SLV-SE80EG, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE80EG

Reviews:

Related manuals for SLV-SE80EG

Brands by name

Popular brands