Sony SLV-SE80EG Operating Instructions Manual Download Page 77

Page: 77 / 88

Editing

Press AUDIO DUB.

The programme position changes to “L2,” and the

indicator appears

in the display window.

To start editing, press the

PAUSE buttons on this VCR and the stereo

system (or other VCR) at the same time.

When the counter reaches “0H00M00S,” audio dubbing stops
automatically.

To stop while editing

Press

STOP on this VCR and the stereo system (or other VCR).

Note

• After you use this feature, the audio in playback mode is automatically set to

monaural.

To listen to both the hi-fi and normal audio

Set AUDIO MIX to ON in the OPTIONS-1 menu (page 72). Use this feature
to listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not funtion.

Remember to reset AUDIO MIX to OFF after playing the tape.

Summary of Contents for SLV-SE80EG

























































































Search results

Summary of Contents for SLV-SE80EG

Reviews:

Related manuals for SLV-SE80EG

Brands by name

Popular brands

Sony SLV-SE80EG, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE80EG

Reviews:

Related manuals for SLV-SE80EG

Brands by name

Popular brands