Sony SLV-SE610K Operating Instructions Manual Download Page 94

Page: 94 / 100

Troubleshooting

Y-TV/Ca

al Plus

You cannot set
channels as PAY-TV/
Canal Plus in the
TUNER menu.

• Check that DECODER/LINE3 (or DECODER/LINE2) in

the OPTIONS-2 menu is set to DECODER (see page 85).

You cannot watch
Canal Plus programmes
when the VCR is in
standby mode.

• Check that DECODER/LINE3 (or DECODER/LINE2) in

the OPTIONS-2 menu is set to DECODER (see page 85).

• Make sure the Canal Plus Scart cable is plugged securely.
• Check that POWER SAVE in the OPTIONS-2 menu is set to

PARTIAL or OFF (see page 86).

A Canal Plus
programme is always
recorded scrambled.

• Make sure the Canal Plus Scart cable is plugged securely.
• Check that DECODER/LINE3 (or DECODER/LINE2) in

the OPTIONS-2 menu is set to DECODER (see page 85).

• Check that this channel is set as PAY-TV/Canal Plus in the

TUNER menu (see page 39).

Oth

A tape cannot be
inserted.

• Check that a tape isn’t already in the tape compartment.

The remote commander
does not function.

• Make sure you are pointing the remote commander at the

remote sensor on the VCR.

• Replace all the batteries in the remote commander with new

ones if they are weak.

• Make sure the

[TV]

[VIDEO]

remote control switch is set

correctly.

The selected input line
connector number does
not appear in the
display window.

• Check that DECODER/LINE3 (or DECODER/LINE2) in

the OPTIONS-2 menu is set to LINE3 (or LINE2) (see page
85).

The SMARTLINK
function does not work.

• Check that your TV complies with SMARTLINK,

MEGALOGIC, EASYLINK, Q-Link, EURO VIEW LINK,
or T-V LINK.

• Make sure you use the Scart cable to connect the VCR and

your TV.

• Make sure the Scart cable is connected securely.

The tracking meter
does not appear on the
TV screen.

• The recording condition of the tape is very poor and tracking

cannot be adjusted.

• The tracking meter does not appear when playing back an

NTSC-recorded tape.

You cannot control
other TVs.

• Set your TV’s code number. The code number may change

when you replace the batteries of the remote commander.

The display window
becomes dim.

• The display window automatically becomes dim when the

VCR is in standby or timer recording mode.

The VCR needs to be
cleaned.

• Clean the cabinet, panel and controls with a dry, soft cloth, or

a soft cloth slightly moistened with a mild detergent solution.
Do not use any type of solvent, such as alcohol or benzine.

Symptom

Remedy

Summary of Contents for SLV-SE610K





































































































Search results

Summary of Contents for SLV-SE610K

Reviews:

Related manuals for SLV-SE610K

Brands by name

Popular brands

Sony SLV-SE610K, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE610K

Reviews:

Related manuals for SLV-SE610K

Brands by name

Popular brands