Sony SLV-SE610K Operating Instructions Manual Download Page 92

Page: 92 / 100

Troubleshooting

lay

The picture rolls
vertically during
picture search.

• Adjust the vertical hold control on the TV or monitor.

The picture has no
sound.

• The tape is defective.
• If you made A/V connections, check the audio cable

connection.

The sound is unstable
or has an echo.

• When you play a tape with the same sound recorded on both

the hi-fi and normal audio tracks, make sure AUDIO MIX in
the OPTIONS-1 menu is set to OFF.

The sound from a tape
recorded with the VCR
is not in stereo or the
STEREO indicator in
the display window is
flashing.

• Adjust the tracking.
• The video heads are dirty. Clean the video heads using the

Sony T-25CLD, E-25CLDR, or T-25CLW video head
cleaning cassette as explained above.

ing

No TV programme
appears on the TV
screen.

• Make sure the TV is set to the video channel. If you are

using a monitor, set it to video input.

• If your TV is connected to the VCR with both Scart and

aerial cables, make sure the RF channel is set to OFF (see
page 21).

• Existing broadcasts may interfere with the VCR. Reset the

RF channel output of your VCR.

• Select the correct source with the INPUT SELECT button.

Select a programme position when recording TV
programmes; select a line input when recording from other
equipment.

TV reception is poor.

• Make sure the aerial cable is connected securely.
• Adjust the TV aerial.
• Make sure the TV system is correctly set for your TV.
• Make sure SYSTEM (B/G or D/K) in the TUNER menu is

set to the same system in your local area.

The tape starts playing
as soon as it is inserted.

• The safety tab has been removed. To record on this tape,

cover the tab hole (see page 47).

The tape is ejected
when you press

REC.

• The safety tab has been removed. To record on this tape,

cover the tab hole (see page 47).

Nothing happens when
you press

REC.

• Make sure the tape is not at its end.

Symptom

Remedy

Summary of Contents for SLV-SE610K





































































































Search results

Summary of Contents for SLV-SE610K

Reviews:

Related manuals for SLV-SE610K

Brands by name

Popular brands

Sony SLV-SE610K, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE610K

Reviews:

Related manuals for SLV-SE610K

Brands by name

Popular brands